Professional standard Dim to Warm CCT toning designed for your high end display and ambient lighting installation requirements. This Dim to Warm tape works by being wired into a dimmable driver, which in turn is wired into a dimmable light switch.

When the light switch is dimmed, the tape will get dimmer and warmer until switched off and when it's brightened the tape will get brighter and cooler.

Tunable through two dedicated White chips to give a CCT range from 1900K to 3000K. Our professional range of LED strip lights is designed to provide you with the highest standard LED lighting solution and robust and reliable lighting solution for professional installations in both commercial and domestic settings by featuring a superior adhesive backing and thicker copper PCB.

Capable of high prescision CCT colour toning with dedicated white chips that provide a high quality >90 CRI output. With 168 LEDs per metre this versatile LED tape is suited to a variety of applications and in areas where a high standard of accent, display and feature lighting is required.

A dimmable driver and dimmable light switch will be required to operate this LED tape to it's full potential. Complete with a 3m Self-adhesive backing for easy fixing into LED channel and a top level 5 year guarantee. Giving you piece of mind on your next installation.

Dimming Compatibility
Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.

Specifications
Product Details:
SMD 2835 LEDs
IP20, suitable for dry locations
Surface mount with 3M adhesive backing
Up to 85 lm/W
24 VDC
UL Listed
Lifetime Warranty

Specifications
Ambient Operating Temperature：-20 to 60 °C (-4 to 140 °F)
Certifications/Compliance：UL Listed
Color Temperature：Dim-to-Warm (1900K-3000K)
CRI：90+
Current Draw：4 A
Current Draw per Foot：244 mA
Dimmable：Yes
Dimmer Type：PWM
Efficacy：85 lm/W
Environmental Rating：Non-weatherproof, Suitable for Dry Locations
Finish：White
Input Connection Type：Pigtail
IP Rating：IP20
LED Beam Angle：120°
LED Color：Dim-to-Warm
LED Density：42 LEDs/ft
LED Chip Type：2835 SMD
LEDs per Segment：14
Length：16.4 ft (5 m)
LED Lifetime：50000 Hours
Lumens Per Foot：498 lm/ft
Max Run (Class 2)：16.4 ft (5 m)
Minimum Cut Length：100mm (3.9in)
Operating Voltage：24 VDC
Product Dimensions：196.85″ x 0.47″ x 0.06″
Strip Width：12mm (0.47in)
Wattage：96 Watts
Wattage per Foot：5.9 W/ft
Wire Gauge：22 AWG