Leave spotting in the dark with the new professional standard in 100% spotless chip on board LED tape. Perfect for a highly desired seamless, spotless and continuous linear lighting solution. Designed for installation into standard LED channels with an internal width of 10mm or more. Comes with a 500mm 2 core cable with tinned ends fitted at each end of the tape and cut points every 29.41mm

Perfect for creating eyecatching, professional standard linear lighting displays. Compatible with DMX, standard and professional Single Colour LED controllers.

Complete with a piece of mind 3 Year Guarantee for indoor use

Capable of a maximum continuous run of upto 5 metres at 24 volts based on a 10% voltage drop after 5 metres. Complete with a 3m self adhesive backing for easy mounting into LED Channel.

Dimming Compatibility
Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.
All products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Product Details:
3M™ adhesive backing for surface mounting
Max run: 24.6 ft (7.5 m)
Cuttable segment length: 1.97 in. (50 mm)
10mm strip width
IP7 waterproof rating
PWM Dimming
Weatherproof connector with included pigtail adapter
24 VDC
UL Listed
5-year warranty

Specifications
Certifications/Compliance: CE, UL Listed
Current Draw: 1.7 A
Dimmable: Yes
Dimmer Type: PWM
Colour: GREEN
Environmental Rating: Suitable for Wet Locations, Waterproof
Finish: White
Input Connection Type: Pigtail, Weatherproof Connector
IP Rating: IP65
LED Beam Angle: 140°
LED Density: 146 LEDs/ft
LED Chip Type: COB (chip-on-board)
LEDs per Segment: 24
Length: 16.4 ft (5 m)
Minimum Cut Length: 50mm (1.97in)
Operating Voltage: 24 VDC
Strip Width: 10mm (0.39in)
Wattage: 40 Watts
Wattage per Foot: 2.4 W/ft