Leave spotting in the dark with the new professional standard in 100% spotless chip on board LED tape. Perfect for a highly desired seamless, spotless and continuous linear lighting solution. Designed for installation into standard LED channels with an internal width of 8mm or more. Comes with a 500mm 2 core cable with tinned ends fitted at each end of the tape and cut points every 29.41mm

Perfect for creating eyecatching, professional standard linear lighting displays. Compatible with DMX, standard and professional Single Colour LED controllers.

Complete with a piece of mind 3 Year Guarantee for indoor use
Complete with a 3m self adhesive backing for easy mounting into LED Channel.

Dimming Compatibility
Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.
All products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Product Details:
3M™ adhesive backing for surface mounting
Max run: 12V is 16.4 ft (5 m); 24V is 32.8 ft (10 m)
Cuttable segment length: 12V is 1 in.; 24V is 1.97 in.
8mm strip width
PWM Dimming
Pigtail connection
12V or 24V DC
UL Listed
5-year warranty

Specifications
Certifications/Compliance：CE, UL Listed
Dimmable：Yes
Dimmer Type：PWM
Colour: Red
Environmental Rating：Non-weatherproof, Suitable for Dry Locations
Finish：White
Input Connection Type：Pigtail
IP Rating：IP20
LED Beam Angle：160°
LED Density：146 LEDs/ft
LED Chip Type：COB (chip-on-board)
Length：16.4 ft (5 m)
Strip Width：8mm (0.31in)
Wattage：40 Watts
Wattage per Foot：2.4 W/ft