Use this RGB LED controller with wireless touch-color RF remote to control your RGB LED light strips. Choose from 29 dynamic color-changing modes with adjustable speed and brightness levels or from static color and white modes with adjustable brightness levels, and control your light strip from up to 65' away. The remote is completely touch activated with a color wheel for direct, fine-tuned color selection. The remote also has power, pause, brightness control, dynamic mode selection, and speed-selection touch buttons. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The polarity-sensitive controller has a maximum load capacity of 8 amps per red, green, or blue channel and is compatible with LED light strips that operate with in a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting. Remote is available in white or black and requires 3 AAA batteries (not included).

Specifications
Ambient Operating Temperature：-40 to 60 °C (-40 to 140 °F)
Amps：24 Amps
Amps Per Channel：8 Amps/CH
Battery Type：AAA (x3 not included)
Certifications/Compliance：CE, FCC
Control Type：Handheld (RF) Remote
Finish：Black
Input Connection Type：Screw Terminal
Number of Channels：3 Channels
Radio Frequency：433.92 MHz
Remote Range：Up to 65.6 ft (20 m)
Voltage：12-24 VDC
Warranty：2 Year