LED Controllers & Dimmers

Single channel amplifier used to increase the load capability and extend the signal of universal single color controllers and dimmers. 4 Amp maximum load. 5~24VDC operation. 2 x 2-pin single color wire leads. Price for each.

This PIR motion sensor automatically powers on connected 12 VDC or 24 VDC LED lights when human motion is detected. The sensors will power on lights at night or during the day, and an adjustable dial allows your lights to remain on for up to 2 minutes (full clockwise turn to 10 equals 2 minutes, and a full counterclockwise turn to 1 equals 45 seconds). The single-channel sensor has a 30-Amp maximum load and operates within a 12-24 VDC range. Price for each.

DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remote to dim single color LED lights between 0-100%.  Remotes must be paired as part of the installation process and do not come pre-paired. Please see manual for details. Product Details: Input Voltage Range: 12–36 VDC Max Input Current: 20.5 A Max. Output Current: 5 A per channel (20 A total)...

DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remote to adjust Tunable White LEDs to desired color temperature.  Remotes must be paired as part of the installation process and do not come pre-paired. Please see manual for details. Product Details: Input Voltage Range: 12–36 VDC Max Input Current: 20.5 A Max. Output Current: 5 A per channel...

DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remote to control RGB/RGBW LED strips, bars, and more. Allows 10 dynamic programs to choose from, as well as adjustable jump and fade settings.  Remotes must be paired as part of the installation process and do not come pre-paired. Please see manual for details. Product Details: Input Voltage Range:...

DMX23 series DMX512 Decoder converts DMX signals to an SPI digital signal for controlling digital LED lights. Compatible with several IC chip types (see complete list below), this interface will run anywhere from 5-24 VDC and control up to 1024 pixels, making it possible to individually control digital pixel lights, DreamColor LED strip lights, and other modules with compatible IC chip types. Choose from among 32 dynamic color-chasing patterns and adjust brightness and speed with the...

This PIR Sensor automatically powers on connected 12 VDC or 24 VDC LED lights for 10 seconds when human motion is detected. Designed to save energy and prolong the life of your LED lights. Motion detection range is within 15' of the PIR sensor. The single-channel sensor has an 8-Amp maximum load and operates within a 12-24 VDC range. Price for each.

Universal Red/Green/Blue (RGB) LED Controller & Dimmer with RF Remote. Remote can control any 12VDC or 24VDC RGB LED products. 20 static color modes with dimming controls, and 19 dynamic color-changing modes with speed controls. Features power cycle mode retention and CPS power plug for easy plug and play installation. Maximum load is 4 Amps per channel - 12 Amps total. 4-pin RGB pigtail connector and battery for RF remote included. Specifications Amps: 12.00 Amps  Amps per Channel: 4...

Variable Color Temperature LED Controller & Dimmer with handheld RF Touch Remote. Can dim any 12VDC or 24VDC Variable Color Temperature LED Flexible Light Strip from 10~100% and dial in any white color temperature using Pulse Width Modulation(PWM). Unique synchronization function constricts remote to one controller, or to multiple controllers for use with one remote. Maximum load is 6 amps per channel, 12 amps total. Specifications Amps: 12.00 Amps  Amps per Channel: 6 Amps/CH Radio...

Universal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included. Specifications Amps: 4.00 Amps  Amps Per Channel: 4 Amps/CH Channels: 1 ...

With this Slide Dimmer Switch,you can controller led strip light easily and simple. Specifications Function: can realize stepless dimming Workingtemperature: -20-60℃ Maximum load current: 2A Voltage: DC 12V output: 1 channel Static power consumption: <1 W External dimension: L130ΧW40ΧH52mm Net weight: 95 g

12V Inline On/Off Switch is for use in switching our LED products on and off between the power source and the fixture. Sleek and discreet, with rounded edges and a subdued black, the 12V Inline Switch is attractive enough to be used in the open and compact enough to be tucked away out of sight. The connections of this switch are DC coaxial, making it compatible with most of our products, whether directly, in conjunction with the Single Color LED Strip Connector with DC Plug, or by splicing to...

Universal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic color-changing modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included. Specifications Applications:  Brightness and pattern control with...