This high-quality RF 2.4GHz 24V 3 Channel LED Driver from Mi-Light can be paired to a 2.4GHz RF Mi-Light / Mi-Boxer Handset or Wall Panel. Control high voltage 12V & 24V remote-controlled RGB LED lighting products effortlessly.

This RGB driver can also be paired to a smartphone by downloading the "Mi-Boxer Smart" application. This allows voice control through third-party speakers such as Amazon Alexa or Google Home smart speakers.

Note: An Additional hub is required for these features to work.

The maximum load on this LED RGB driver is 1.9A (400W) or 12A (12A / Channel). The RGB driver is powered by a 100-240v AC 50/60Hz mains supply providing an output voltage of 12V - 24V DC (Direct Current).

The RGB driver also has connections for a "Push Dimmer" switch which can be hard-wired to the RGB driver to allow "Push Dimming" of your lighting.

Note: The "Push Dim" does not operate the colour of your lighting. It will only adjust the brightness level of the colour selected and the ability to switch it on and off.

Ensure the LED lighting is connected to a suitable power supply. Then simply wire the smart light into the stylish 3 channel LED driver and enjoy full control over the smart home LED lighting system.

This RGB LED driver features an auto transmitting & synchronising function when controlled from a 2.4GHz RF (Radio Frequency) handset or wall panel. Multiple LED RGB drivers can be paired to the same single zone on the controller. Make sure they are all within 30m of each other.

For more information on this product, don't hesitate to get in touch with our sales team. Call, email or use our online live chat to talk to our technical sales team.

Shop our range of LED Controls through our website or contact our technical sales team.

Features:
RF 2.4GHz LED Dimming Driver
For RGB LEDs
30m signal transmiting and synchronization