This high-quality "Five-in-One" multichannel receiver is available from our fantastic MiLight product range. Using the "Set" button, the unit can be adjusted to control single-colour, dual-white (CCT), tri-colour (RGB), quad-colour (RGBW) and RGBW+CCT 12V or 24V LED products.

DALI (stands for Digital Addressable Lighting Interface) / PWM controller conforms to the latest DALI Protocols (IEC26386). This controller boasts an impressive management system; able to control 5 types of LED lighting.

To set the control mode simply toggle the set button on your DALI controller. This will change the colour of the adjacent indicator light to show:

White for Single colour mode
Yellow for Dual White mode
Red for Tri-Colour (RGB) mode
Green for Quad Colour (RGBW) mode
Blue for Five Channel (RGB+CCT) mode
 
Each of these modes will take up 1 x DALI address up to 5 x DALI addresses if you set the controller into RGB+CCT mode. Each channel is rated a 6A however the total combined load over all five channels should not exceed 15A maximum load. The controller will accept a 12V or 24V DC (Direct Current) constant voltage input.

This DALI lighting Control device is great for controlling any LED lighting system. Make sure the LED lighting is connected to a suitable power supply. Then wire the lights into your stylish DALI LED multi-channel receiver and enjoy full control over your LED lighting DALI system.

For more information on this product and control options, don't hesitate to get in touch with our sales team. Call, email or use our online live chat to talk to our technical sales team.

Shop our range of LED Controls through our website or contact our technical sales team.

Features:
12v/24v 5in1 DALI DT6 Controller
Single, Dual, Three, Four & Five Channel modes
15A Max load (6A/Channel)
Supports standard DALI protocols
Indicator light for mode set
Single button operation to set mode
Compact design