Mi-Light & MiBoxer Lighting

The FUT039L is an excellent 433MHz LoRa receiver which works off the LoRa spread spectrum system. This MiBoxer LED Controller/Receiver has super long-range communication, and when paired with the LoRa Handset (FUT086), it can be operated up to 500m away from the handset. If there are obstacles between the units it may affect the range of the LED receiver dramatically. The receiver will switch, dim, and control your 12V or 24V DC RGB+CCT LED lighting products such as RGB+CCT LED Strip which will...

This brilliantly designed 2.4GHz RF controller is a versatile unit that can be used as a wireless wall panel or handset. The controller is finished in a smart black colour and is powered by a 3V CR2032 button batteries, it can be attached to the magnetic wall bracket supplied and used as a wall panel, as it is battery powered, it doesn't require any wiring or power supply. To use the controller as a wireless handset, simply lift it off the magnetic wall panel base and it can then be carried...

This compact 2.4GHz RF controller is a versatile unit that can be used either as a wireless wall panel or a wireless handset. The controller is finished in a smart cool white colour and is powered by a 3V CR2032 button batteries, it can be attached to the magnetic wall bracket supplied and used as a wall panel or, as it is battery powered and doesn’t require any wiring or power supply, simply lift it off the magnetic wall panel base and it can then be carried around and operated as a...

This high-quality female end cap is designed to be fitted to the DMX extension link cables on the Mi-Light DMX Floodlights and DMX battens. The end cap is supplied with a safety ring that should be fitted over the female socket on the extension cable so that when the cap is removed from the socket it will not get lost. The end cap has a silicone seal fitted inside to stop water ingress into the cables and should always be fitted to terminate the cable properly. Features: For DMMXLINE10000...

This high-quality male end cap is designed to be fitted to the DMX extension link cables on the Mi-Light DMX Floodlights and DMX battens. The end cap is supplied with a safety ring that should be fitted over the male plug on the extension cable so that when the cap is removed from the socket it will not get lost. The end cap has a silicone seal fitted inside to stop water ingress into the cables and should always be fitted to terminate the cable properly. Features: For DMMXLINE10000 &...

Made from a high-quality rubberised cable for the best flexibility, this 3m 2 core link cable is fitted with special IP66-rated connectors designed to link together your Mi-Light SL113 3W Downlighter, the FUTC08A 6W Garden light set and the RL524 LED battens. Features: For use with Mi-Light SL113, FUTC08 & RL524 products 3 Metres in Length Flexible durable cable 5 Year Guarantee

Made from a high-quality rubberised cable for the best flexibility, this 4m DMX link extension cable is fitted with special IP66-rated Mi-Light 3pin male and female connectors to enable you to extend the distance between your Mi-Light DMX Floodlights and DMX Battens by up to 4m. This special IP66-rated DMX 5m Extension cable is designed for use with the D5W72 and D4W72 DMX Wall washers and the D5G50 and D5G100 DMX Floodlights. Features: For use with Mi-Light DMX Floodligths and Battens Links...

Made from a high-quality rubberised cable for the best flexibility, this 5m DMX Starter cable is fitted with a standard 3-pin Male XLR plug that can plug directly into a DMX 512 desk. At the opposite end of the cable is a 3pin IP66-rated female socket that is designed for use with the D5W72 and D4W72 DMX Wall washers and the D5G50 and D5G100 DMX Floodlights. This enables you to plug directly from your DMX lighting desk into the special IP66-rated plugs and sockets on the battens or floodlights....

The Mi-Light PR1 is a very effective 2.4GHz signal range extender that is designed to work with the Mi-Light range of products that feature signal synchronisation. By passing the signal from device to device, the 2.4GHz range of Mi-Light products effectively forms a MESH network of devices that all work together. For example, this allows a group of floodlights to be controlled together irrespective of distance, providing each floodlight is within 30m of the previous unit. Sometimes this is not...

If you are looking to switch mains powered devices on and off by either a 2.4GHz remote-control handset, wall panel or even from your smartphone, the WLSW1 is an ideal product. This compact device is able to power on and off mains powered devices up to a maximum of 10A and it will work with any mains voltage from 100V up to 240V AC. The addition of a hard-wired connection for a "Push Switch" enabled you to also use a momentary switch to power your mains products on and off. To control...

The PIR1RF is a superb wireless (battery-powered) multi-featured PIR sensor. The sensor includes a magnetic base that can be fitted to most surfaces using the attached sticky backing. The sensor attaches magnetically to the base, allowing a full 360° adjustment by simply positioning the sensor as required. When paired to a 2.4GHz Mi-Light handset the sensor's parameters can be programmed using the handset, and the hold time can be adjusted to 30 seconds, 2 minutes, 10 minutes or 60...

This ultra-compact Wi-Fi home automation hub (measuring just 64.5mm x 64.5mm x 15mm) is available from our quality range of Mi-Light products. It connects to a Wi-Fi router wirelessly, acting as a bridge between a smartphone or a third-party smart speaker. This gateway is compatible with the intuitive Tuya application which enables various scenes, programs, and timers to be accessed from anywhere. Even a “Sound to Light” function is available which works well for installations in...

This LED remote transmitter and receiver kit is available from our range of Mi-Light products. This set offers a pre-paired 2.4GHz three-in-one receiver and transmitter, which is an ideal solution for controlling RGB, RGBW and RGB+CCT LED lighting such as LED strip lights. as the receiver can be set to three channel, four channel and five channel modes. This enables the set to be used for multiple applications rather than just RGB. The 2.4GHz RF signal will also synchronise wirelessly between...

This multi-featured 3 in 1, 2.4GHz RF and ZigBee receiver from Mi-Light can be controlled wirelessly using a compatible 2.4GHz Mi-Light & Mi-Boxer handsets or wall panel. Pairing and unpairing the handset or wall panel to the receiver is simple and pairing to a ZigBee gateway is easy to do. The PWM frequency of the unit can also be set at either 16KHz or 250Hz helping to reduce flicker and banding when the product that it is controlling is photographed or videoed. This receiver also works...

This multi-featured 3 in 1, 2.4GHz RF and Wi-Fi receiver from Mi-Light can be controlled wirelessly using a compatible 2.4GHz Mi-Light & Mi-Boxer handsets or wall panel. Pairing and unpairing the handset or wall panel to the receiver is simple. The PWM frequency of the unit can also be set at either 16KHz or 250Hz helping to reduce flicker and banding when the product that it is controlling is photographed or videoed. This receiver also works through Wi-Fi without a gateway and can be...