Cables, Wires, & Connectors

The Solderless RGBW COB Butt Connector creates a continuous strip run between two 12mm strip segments. Using no visible wiring and clear polycarbonate construction, the connector gives the appearance of a clean, seamless application. The pins form a secure, tight connection without soldering. The guide tunnel allows for a straightforward, easy connection. Has a 5.5A max current rating. Product Details: Clear Polycarbonate Construction 5.5A maximum current rating 5 Conductors IP20, Indoor Only

Connect a 12mm RGBW COB strip light to power using the clamp-on pigtail wire. The power wire is 5.5" in length. The connector uses pins to form a secure, tight connection without soldering. Each connector has a slim profile designed to fit into aluminum channels or narrow installations. Product Details: 3.5A maximum current rating 5 Conductors IP20, Indoor Only

Connect segments of a 10mm RGB COB strip light using the clamp-on wire connector. The pins form a secure, tight connection without soldering. Each connector has a slim profile designed to fit into aluminum channels or narrow installations. Product Details: 3.5A maximum current rating 4 Conductors IP20, Indoor Only

Continue the run of a 10mm RGB COB strip light using this clamp-on jumper connector. The jumper connector is 6.5" long for continuing strip light runs over doorways, corners, etc. The pins form a secure, tight connection without soldering. Each connector has a slim profile designed to fit into aluminum channels or narrow installations. Product Details: 3.5A maximum current rating 4 Conductors IP20, Indoor Only

Continue the run of a 12mm RGBW COB strip light using this clamp-on jumper connector. The jumper connector is 6.8" long for continuing strip light runs over doorways, corners, etc. The pins form a secure, tight connection without soldering. Each connector has a slim profile designed to fit into aluminum channels or narrow installations. Product Details: 3.5A maximum current rating 5 Conductors IP20, Indoor Only

Connect a 12mm RGB+CCT COB strip segment to another using this clamp-on butt connector. The pins form a secure, tight connection without soldering. Each connector has a slim profile designed to fit into aluminum channels or narrow installations.  Product Details: 3.5A maximum current rating 6 Conductors IP20, Indoor Only

The Solderless RGB COB Butt Connector creates a continuous strip run between two 10mm strip segments. Using no visible wiring and clear polycarbonate construction, the connector gives the appearance of a clean, seamless application. The pins form a secure, tight connection without soldering. The guide tunnel allows for a straightforward, easy connection. Has a 5.5A max current rating. Product Details: Clear Polycarbonate Construction 5.5A maximum current rating 4 Conductors IP20, Indoor Only

Connect an 8mm COB LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place. Wire not included.

Connect a 10mm single color LED strip light to power. The adaptor has 4” power wires and the clear connector securely holds wires and strips in place.

Connect an 8mm single color LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place. Do not strip the wires when using this connector. Wire not included.

Connect an 8mm COB LED strip light to power. The adaptor has 4” power wires and the clear connector securely holds wires and strips in place.

Connect a 10mm single color LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place. Do not strip the wires when using this connector. Wire not included.

Connect a 12mm RGBW LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place. Do not strip the wires when using this connector. Wire not included. Not for use with COB LED strips. Compatible with SMD LED strips only.

Connect two 8mm COB LED strip lights together. The connector has 4” power wires and the clear connector securely holds wires and strips in place.

Connect an 8mm single color LED strip light to power. The adaptor has 4” power wires and the clear connector securely holds wires and strips in place.